|
 Toll
Free US
and Canada 1-800-663-0029
604-276-2327
 |
Blue Sea Systems, Single Cable Cap 1/2" |
# 4001 |
7.45 pair |
| Designed to prevent
accidental grounding of battery terminals and other high amperage studs.
For batteries with integral marine terminals, for single cable only.
Rotating tops allow cable leads at any angle, simplifying installation.
Pair consists of one red, one black. |
 |
Blue Sea Systems, 8- 4 ga Red 2/pk |
# 4010 |
3.76 pk |
| Cable Cap Stud Insulators are made in four sizes to fit any cable and have large terminal openings to fit over marine ring terminals. The molded PVC is recognized under the UL Components program and is elastic enough to enable Standard Cable Caps to be installed after terminals have been crimped on the cables. |
 |
Blue Sea Systems, 8- 4
ga Black 2/pk |
# 4011 |
3.76 pk |
| Cable Cap Stud Insulators are made in four sizes to fit any cable and have large terminal openings to fit over marine ring terminals. The molded PVC is recognized under the UL Components program and is elastic enough to enable Standard Cable Caps to be installed after terminals have been crimped on the cables. |
 |
Blue Sea Systems, 2 - 2/0 ga each |
# 4012 |
3.76 each |
| Cable Cap Stud Insulators are made in four sizes to fit any cable and have large terminal openings to fit over marine ring terminals. The molded PVC is recognized under the UL Components program and is elastic enough to enable Standard Cable Caps to be installed after terminals have been crimped on the cables. |
 |
Blue Sea Systems, Cable
Cap 1X.500 Black |
# 4013 |
4.57 each - available
in black only |
| Cable Cap Stud Insulators are made in four sizes to fit any cable and have large terminal openings to fit over marine ring terminals. The molded PVC is recognized under the UL Components program and is elastic enough to enable Standard Cable Caps to be installed after terminals have been crimped on the cables. |
 |
Blue Sea Systems, Standard Cable Cap 5/8" |
# 4006 |
5.27 pair |
| For batteries with marine adaptor terminals added on, pair consists of one red and one black. 5/8" cable hole.
|
 |
Blue Sea Systems, Standard Cable Cap 1/2" |
# 4005 |
5.27 pair |
| For batteries with marine adaptor terminals added on, pair consists of one red and one black. 1/2" cable hole.
|
 |
Blue Sea Systems, Battery Switch 4 - Position |
# 9001e |
48.26 each |
| For managing battery banks in applications requiring high power output, reliability, and low heat generation. Accepts up to 4/0 battery
cables, luminous labels for low light reading and is ignition protected for use aboard gas powered boats.
9000 Series Rated:350 Amp Continuous / 600 Amp Intermittent. Engine Starting: 1750 Amp Inrush / 900 Amp Cranking. |
 |
Blue Sea Systems, Switch
batt mini on/off w/knob |
# 6006 |
35.60 each |
M-Series (Mini) Battery Switch Single Circuit ON/OFF
Measures 2.825" x 2.825"
Cranking rating: 700 Amps Continuous rating: 300 Amps
Maximum voltage rating: 48VDC
Accepts up to 4/0 AWG battery cables |
|
